How can I see the CO/CO2 ratio on my KANE250
1: Power up the KANE250 Flue Gas Analyser and allow to purge in fresh air.
2: Rotate the dial to MENU, the screen now shows MENU SET TIME
3: Press the PRINT key (second from the left) twice. The screen now displays MENU on the top.
4: Press the HOLD key (far right hand side). The display now shows TOP LINE and the
current time.
5: Press the PUMP key (second from the right) THREE times, the display now shows
TOP LINE R 0.0000.
6: Press the HOLD key (far right hand side) This sets the top line to the CO/CO2 Ratio.
The screen will now show MENU C<---> F
7: Rotate the dial to CO.
8: The CO/CO2 Ratio is now displayed on the top line of the display and CO is the bottom line.